Final Check & Closing the case

Before you close the case double check everything to make sure you have not missed anything like attaching a cable. Make sure you have no screws lying around as it can short the motherboard. Slide the side panel back on to the case and close the screws. If you are feeling confident you can leave the case open and power up the PC just to see if it boots and all the fans are spinning. You can also test your power button and reset button to make sure they work before closing the case. You have now completed building a PC from scratch.

Lets have a look at the front of the case.

Finally we will take a look at the back of the case.

Attach the power cable along with monitor, keyboard, mouse and other peripherals so that we are ready to boot.

Watch the Video Guide :